More Topics on Inspection

A Primary Mission of the Council is to promote effective means of surface preparation in the maintenance industry using water and water/abrasive blasting techniques. Checkpoints and final inspections shall be signed off by certified coating inspectors. The implementing contractor shall maintain a certification program for blasters and painters working on the project. The inspection shall …

Inspection Log and Inspection

A Primary Mission of the Council is to promote effective means of surface preparation in the maintenance industry using water and water/abrasive blasting techniques. Checkpoints and final inspections shall be signed off by certified coating inspectors. The implementing contractor shall maintain a certification program for blasters and painters working on the project. The inspection shall …

Floodable Voids

1.1 Cleaning, Surface Preparation and Painting Requirements for Ballast Tanks and Floodable Voids. MSDS and manufacturer’s ASTM F 718 sheets, Shipbuilders and Marine Paints and Coating Product / Procedure Data Sheet for Coating System Being Applied. NOTE: As stated in section 4.8.2 of the CORE PPI the application of Euronavy ES 301 is exempt from …

Potable Water Tanks

1.1 Cleaning, Surface Preparation and Painting Requirements for Potable Water Tanks. 1.2 If the PPI checkpoint criteria are met, the following table provides service life expectancy for the listed systems. MSDS and manufacturer’s ASTM F 718 sheets, Shipbuilders and Marine Paints and Coating Product / Procedure Data Sheet for coating systems being applied for specified …

Large Tanks with Water from Reverse Osmosis Evaporators

1.1 This T&E PPI provides requirements for cleaning, surface preparation and painting of potable water tanks, 1000 gallons or larger, that are filled with water from reverse osmosis evaporators. The coating described herein is NOT to be installed in smaller tanks, and should not be put in potable water tanks with ships that have flash …

MSDS and Surface Preparation Methods

MSDS and manufacturer’s ASTM F 718 sheets, Shipbuilders and Marine Paints and Coating Product / Procedure Data Sheet for coating system being applied. NOTE: IMPLEMENTING AUTHORITY WILL DESIGNATE SURFACE PREPARATION METHOD TO USE, METHOD 1 UHP WATER JETTING, OR METHOD 2 POWER TOOL CLEANING. NOTE: The Responsible Implementing Authority shall have the authority to reject …

High Traffic Interior Decks

1.1 Cleaning, Surface Preparation and Painting Requirements for High Traffic Interior Decks. MSDS and manufacturer’s ASTM F 718 sheets, Shipbuilders and Marine Paints and Coating Product / Procedure Data Sheet for Coating Systems Being Applied. 4.5.1 Record and restore existing painted labels, compartment designations, hull markings, and other painted information which will be removed or …

Inspector Responsibilities

A Primary Mission of the Council is to promote effective means of surface preparation in the maintenance industry using water and water/abrasive blasting techniques. Checkpoints and final inspections shall be signed off by certified coating inspectors. 4.3.4 COATING INSPECTOR RESPONSIBILITIES: Coating inspectors are responsible for requirements listed in NSTM 631, Section 11.7. 4.10.1 Prevent contamination …